Cable excellence engineered through quality

EventSeries® DMX Data Control Cable 500 V

DMX-01_CS.png
Application

The DMX range complies with the requirements of DMX512-A and is an RS-485 based communications protocol that is most commonly used to control stage lighting and effects.

Cable Design
Conductor Stranded Tinned Copper (16 x 0,20 mm) 0,5 mm2
Insulation Foam Polyethylene Ø 1,8 ± 0,5 mm
Pair 2 wires twisted to a pair
No. of Pairs 1 Pair : Black, Red
2 Pair : Black, Red, / Yellow, Green
Drain Wire Stranded Tinned Copper (16 x 0,20 mm)
Shield Aluminium/polyester tape. (Aluminium inside)
Outer Jacket LSZH FireFighter®, FRLS or TPE
Characteristics

• Most commonly used to control stage lighting and effects

• Flame Retardant acc. to IEC 60332-1 

• Halogen Free acc, to IEC 60754

• Smoke Density acc. to IEC 61034

Specification
Part Number Application No. of Pairs Type Overall Diameter [mm] Min. Bending Radius [mm] Colour
DMX-01 Patching 1 FRLS 5,75 ± 0,3 60 Black
DMXLSZH-01 Install 1 LSZH FireFighter® 5,75 ± 0,3 60 Black
DMXLSZH-10 Install 1 LSZH FireFighter® 5,75 ± 0,3 60 White
DMX-04 Patching 1 FRLS 5,75 ± 0,3 60 Red
DMX-P-01* Portable 1 TPE 5,75 ± 0,3 60 Black
DMXLSZH2-01 Install 2 LSZH FireFighter® 8,20 ± 0,5 90 Black
+44 (0) 1279 871150